1. Cen Tech Obd Ii Scanner
2. Cen Tech 60794 Update
3. Cen Tech 60794 Update File Download

On-Board Diagnostic regulations is called 'OBD II'. The OBD II system is designed to monitor emission control systems and key engine components by performing either continuous or periodic tests of specific components and vehicle conditions. When a problem is detected, the OBD II system turns on a warning lamp (MIL). Cen-tech 99722 I have tried to update software. It's looking for an.AUT file, but none was on the software provided with the unit. All OBD Codes are on the internet with print,charts,video,solutions You Type your codes & read up Study OBD 2 Systems also OBD PO171 OBD PO174 I had to Google Cen Tech as i never heard of it They appear to be.

OBD-II code readers diagnose problems with your vehicle. All vehicles manufactured from 1996 onward are equipped with On-Board Diagnostic II computers. This computer detects error codes and displays warning and service lights on the instrument panel alerting you to have your vehicle checked out and repaired by a mechanic. The codes can be read by an OBD-II code reader and later erased, thus resetting the computer and shutting off the warning and service lights. These code readers are also called scanners and can be purchased from your local auto parts retailer.

Step 1

Find the diagnostic link connector under the driver's side dashboard. This is usually found to the left or right of the steering column. Plug the OBD II scanner into this port.

Step 2

Put the key into the ignition and turn it to the 'On' position but don't start the car. This will power on the scanner. Select the command 'Read Codes' or a similar type of command.

Step 3

Write down the numerical codes and look them up in the scanner's operation manual.

Step 4

Unplug the scanner and have the vehicle serviced or repaired.

Step 5

Repeat step 1. Put the key back into the ignition and turn it to the 'On' position. Select the 'Delete Codes' option and wait for the scanner to complete the task. Unplug the scanner.

Start the engine and verify all service and warning lights have shut off.

Tip

• You can borrow a scanner from your local auto parts store usually for free.

Items you will need

• OBD II scanner with operation manual
• Ignition key

• 'Jeep Grand Cherokee--2005 thru 2009 (Chilton's Total Car Care Repair Manual)'; Chilton; 2010

• Jupiterimages/Photos.com/Getty Images

More Articles

How CENTECH 60693 OBD II & CAN Deluxe SCAN TOOL works

There are two different types of tests that you can run with the OBD II CAN Deluxe Scan Tool. You can do either a running test, which means the car is running while the diagnostics are being done. Then there is the nonrunning test that is performed with the engine off but the ignition on. Depending on what you need to know, you may need to run both tests to find the issue.

Cen Tech Obd Ii Scanner

Plug the CENTECH scanner into the OBD-II port under your dashboard, on the driver's side. You will plug the device into this outlet. You then need to turn the ignition to the on position, without starting the car.

Depending on the type of test, you can either get the read out now, or start your car. All the readouts are stored onto the device. You can run the test and get the readout. Then you take those codes and interpret them so that you can clearly see what the issue is.

Warning: Avoid using the scanner while driving because you need to keep your hands on the wheel.

Features

• Supports all OBD II protocols and the Controller Area Network (CAN) protocol
• I/M Readiness Key for quick drive cycle verification and state emissions readiness check
• Retrieves generic codes (P0, P2, P3, U0), manufacturer codes (P1, P3, U1) and pending codes
• Provides Code/Cause/Solution tips for easier troubleshooting
• Retrieves vehicle information (, CIN and CVN)
• Views freeze frame data
• Trilingual menu and definitions - English, Spanish, French
• No batteries required, powered by vehicle's battery.

The OBD II CAN Deluxe Scan Tool shows up to twenty pieces of vital information at any given time. These are in color and easy to read right on the LCD display. Not only can you read the check engine light symbol, but you can also easily clear it.The buttons are easy to use. They can switch you between reading with no hassle. You will love the memory back up that stores issues so that you can determine problems and patterns. Not only is the check engine light decodable, but also the ABS slight is easy to decode and clear. This is great product for any car that is newer than 1996.

• Easy to use!
• Supports OBD2 and CAN protocol vehicles.
• Can be used to check emission status. I/M Readiness
• View freeze frame data

Cons

• Does not work will all makes and models.
• At times displays blocks on the screen or does not link with the car.
• Difficult to run the updates.

In conclusion, as far as diagnostic scanners go this is reliable and easy to use. The OBD II CAN Deluxe Scan Tool is exactly the right tool to match all these needs. With that said, there are better scanners that cost half the price of the Deluxe Scan Tool.

Verdict:

Cen Tech 60794 Update

While it is a reliable scanner we would recommend skipping the OBD II CAN Deluxe. A better option would be the Autel AutoLink AL319 OBD II & CAN Scan Tool, provides all of the same functionality but costs much less.

Cen Tech 60794 Update File Download

Specifications: